To program your TiVo^® Stream remote to your TV:

1. Turn on your TV.

2. Press and hold the TiVo and TV POWER buttons on the remote at the same time for about 3 seconds. The activity indicator light will turn solid red.

3. Press Volume Down 3 times and then press the TiVo button. The activity indicator light will flash red 3 times.

4. Press the TiVo button again and follow the on-screen instructions.

You’ve now programmed your TiVo Stream remote to your TV.

To program your TiVo Stream remote to your audio/video receiver:

1. Turn on your TV.

2. Press the TiVo button on the remote.

3. Select Menu from the homepage.

4. Select Remote Settings.

5. Select Set Up A/V Receiver.

6. Select Next.

7. Select your receiver or audio device’s brand.

8. Select Next to test the remote.

9. Press OK to test volume up.

10. Select Yes if the A/V receiver power indicator is displayed. Otherwise, select No to try the next code on the list or

11. Select try again to repeat the same code.

12. Repeat step 10 to test Mute and Power.

13. Select Finish and return to the menu.

You've now programmed your TiVo Stream remote to your audio/video receiver.

Each of your TiVo^® remotes must be paired with the receivers they’re used with. To get started, put your remote in programming mode and then pair it with your receiver. 

To put your TiVo remote in programming mode:

1. Turn on your TV.

2. Press the TiVo button on the remote.

3. Select Menu from the homepage.

4. Select Settings.

5. Select Remote Cable Card & Devices.

6. Select Remote Control Setup.

To pair your TiVo remote to its receiver:

1. Select Remote Control Pairing.

2. Follow the on-screen instructions.

You’re now ready to program your remote to your TV and audio/video receiver.

To program your TiVo remote to your TV:

1. Select Set TV Power, Volume and Mute.

2. Select your TV Brand and press OK. 

3. Take note of the codes highlighted in blue.

4. Press and hold the TV Pwr & TiVo buttons at the same time until the light at the top of the remote remains lit. Enter one of the 4-digit codes.

5. Press TV Pwr. If the TV doesn't turn off, return to the previous step and try another 4-digit code.

6. If none of the available codes work, click here for instructions to find the code for your TV. Enter the code and repeat the previous step.

You’ve now programmed your TiVo remote to your TV.
 

To program your TiVo remote to your audio/video receiver:

1. Select Set AV Volume and Mute.

2. Select your audio receiver brand and press OK.

3. Take note of the codes highlighted in blue.

4. Press and hold the MUTE & TiVo buttons at the same time until the light at the top of the remote remains lit. Enter one of the 4-digit codes.

5. Press Mute. If the audio doesn't mute, return to the previous step and try another 4-digit code.

6. If none of the available codes work, click here for instructions to find the correct code for your device. Enter the code and repeat the previous step.

You’ve now programmed your TiVo remote to your audio/video receiver.

To program your Champion remote to your TV, DVD or audio receiver:

1. Turn on your TV, DVD or audio receiver.

2. Press the TV, DVD or audio device button.

3. Press and hold the Setup button at the top right comer of the remote until the device button blinks twice.

4. Press the TV, DVD or audio device button again. The button will remain lit.

5. Press and hold down the OK/SELECT button.

6. Release the OK/SELECT button when the device turns off.

You’ve now programmed your Champion remote to your TV, DVD or audio receiver. Your remote comes pre-programmed for your digital receiver.

To program your Pulse remote to your TV:

1. Turn on your TV.

2. Press the TV device button.

3. Press and hold the Setup button until the light below the power button blinks twice.

4. Press and hold down the OK/ENTER button.

5. When the TV turns off, release the OK/ENTER button.

You’ve now programmed your Pulse remote to your TV. Your remote comes pre-programmed for your digital receiver.